This is the list of 7 top bandsaws for 2022

Our editors test and independently recommend only the most effective products. Read more to learn about how our editors do this. You may be eligible for commissions if you make a purchase through one of our selected links.

The Spruce/Chloe Jeong Band saws are a versatile tool that can be used to cut wood and metal in straight lines, curves, or more irregular shapes. The band saw’s main feature is its long looped blade, which runs between two wheels. Band saws offer excellent control, making it possible to perform delicate tasks better than other types. While some bandsaws can be mounted on the ground, others are portable and benchtop models.

Andrew Wilson, a contractor, and the founder of Contractor Adviserly explains that a bandsaw is essentially a long knife running between two wheels. Band saws can cut through both wood and metal. It’s not the best at cutting straight lines like other saws, but it can cut curves quite efficiently. Although there is an assortment of sizes available, 12-inch to 13-inch are the most popular. A saw’s power is important. The largest floor-standing tools may have a 2-horsepower motor, however, it is common to find a saw that has a 1-horsepower or 1.5-horsepower engine. However, there are some benchtop lightweight tools that have less.

We have compiled a list of top-rated bandsaws suitable for various uses.

Amazon Top Picks JET 14-Inch Deluxe Proband Saw – JWBS-14DXPRO This high-quality machine can cut wood and metal with ease and precision.

WEN 3959 9-Inch Band Saw at Amazon

This compact-but-still-powerful saw is all that’s needed if you mostly cut smaller boards or other materials.

Read and Review

These are The 5 Most Popular Band Saw Uses

Bandsaws (or bandsaws) are most commonly used to make angled cuts. The following picture is from John Fry of LumberJocks and shows cabriole legs he created using a Band Saw.

Not only are they great for cutting curvaceous lines, but the top band saws also have the ability to trim lumber to thinner sections and do precise cross-cuts. A band saw can be one of your most efficient cutting tools. You can buy a vertical band saw, wood band saw, horizontal band saw, benchtop band saw, and more!

Although it may seem a bit archaic, the system is similar to the one you can see on the 14-inch Grizzly bandsaw’s wheel and pulley configuration.

You can make a steady cut by the downward motion of the wheels. The downward cutting action makes band saws safer than table saws. This virtually eliminates “kickback” which is a factor when using a table saw.

There are many sizes of bandsaws, including small tabletop models. Also called benchtop bandsaw, Benchtop bandsaw models tend to be more affordable, and obviously take up less room if you are a little tight on space.

Buy a Bandsaw

By Joshua Farnsworth

A bandsaw is a woodworking machine that spins a flexible blade around two metal wheels while under tension. Bandsaws are useful for (1) ripping boards down their length, (2) resawing boards for veneer and thinner furniture parts, and (3) cutting curves. These operations can certainly be accomplished with a rip hand saw and a bow saw, but can take much, much longer to accomplish.

I’ve had several students tell me that they decided to switch to using all hand tools, except for their bandsaw. They just found the bandsaw to be a huge time & effort saver, and their bandsaw was the power tool that scared them the least. It’s great to use my rip handsaws on a single board but it’s not something that I like to do with when I have several or twenty boards. Woodworkers who are unable to work due to health conditions may find ripping boards difficult. The bandsaw definitely saves me a lot of time and effort in those situations. However, the bandsaw is not recommended for resawing large boards or cutting many curved pieces. A rip hand saw, or a Bow Saw, may work better.

A smaller, less powerful bandsaw might be the best choice if you only plan to rip smaller boards and cut curves. A JET-bandsaw 14 inches in size (under 2 HP) may suit your needs.

If you are like me and plan on ripping a lot thick boards and resawing lumber (for bookmatching panels or veneering), then a bigger and more powerful bandsaw is required.

For me, cost is an important consideration. Because I use hand tools, I don’t need a top of the line, $5,000 bandsaw with all the precision features. I need a powerful bandsaw that is good at doing rough work, which I always follow up with hand tools or more precision power tools. This is how I use handsaws. Handsaws are used to reach a specific line and handplanes work to go up the line. Precision work is not something I use often.

I once owned a JET small bandsaw (pictured above), but I purchased a Grizzly Grizzly a little over 4 years ago. Although the JET saw worked well, it was not as powerful or large as I wanted. You can modify 14 inch bandsaws with a riser to enable resawing. However, larger bandsaws, such as this 17-inch model, have stronger frames, stronger guides and more power. To do serious resawing, a bandsaw must have at least a 1.75HP motor. And a bandsaw of this size excels at resawing boards from small logs with a Carter Log Mill . This set-up works just like a miniature bandsawmill.

My Bandsaw Of Choice. Over the years I have used a lot Grizzly brand woodworking tools. Grizzly’s power tools are more affordable because they have a higher sales volume. They also don’t distribute through distributors. So I bought a 17-inch 2 HP Grizzly G0513ANV bandsaw. The price of this machine (instead of their more traditional green) is much lower because it’s the anniversary edition in black. It’s the same bandsaw as the Grizzly G0513 model , but it is painted black and orange. It looks great.

Buy it online with free shipping This bandsaw won the “Best of Value” award in a well-known woodworking magazine’s bandsaw test.

This saw is powerful enough to handle most thicknesses of lumber. I can also use it for cutting wide boards. But, the reason this bandsaw attracted me to it is its ability to resaw board up 12 inches in size. The bandsaw is capable of doing a lot more than just resawing. However, the stock fence is not suitable for resawing. The bandsaw table can also be clamped onto a thick wooden board. You can also buy a resaw fencing. This resaw is approximately $150. It provides great security and support, both for resawing cut and regular rip cuts.

Woodworking dvds and digital videos

View our woodworking videos classes in HD streaming / download and DVD.

Bandsaw Blades Buying Guide: What Bandsaw Blades Are Best?

Most of the blades included with a brand new bandsaw don’t perform well. They’ll work alright for rough ripping of a board, but not much else. One would think that companies would invest a little more to let customers see the quality of their expensive bandsaw. There are far better bands saw blades. Be sure to research the options so that you do not buy poor-quality band saw blades or overspend on blades you don’t actually use.

The best general-purpose blade I can recommend is a 3 tpi carbon steel bandsaw. Clogging is prevented by a course tooth count. Because it has less clogs and an easier rake angle, skip-tooth helps with faster cuts. You can fit a 1/2-inch blade on any size bandsaw. This includes small benchtop or larger bandsaws. This bandsaw blade is great for cutting large curves, ripping and joint cutting. Although a 3/4-inch resawing cutting blade can fit larger bandsaws and offer greater tracking capabilities, they do not offer any performance advantages.

Highland Woodworking’s Wood Slicer(r-resaw) Bandsaw Blade won the test. It was all 1/2 inch wide. The Wood Slicer blade is not only fast at resawing and general ripping, but leaves a lot fewer saw marks than most other bandsaw blades. You can also save time and effort by using this blade. The blade’s kerf is shorter and stronger than most other bandsaw blades.

Here are the Wood Slicer saw blades. Just choose the appropriate blade length for your bandsaw. Highland Woodworking claims that the blade is multipurpose, but suggests that you purchase a less expensive blade to rip normal wood, while keeping this beautiful blade sharp for resawing. And here’s a video about this blade:

If you also plan on cutting tight curves, then buy a blade dedicated for that purpose. Choose a skip tooth bandsaw blade that is between 1/8″ and 1/4″, with 4 tpi. The popular skip tooth bandsaw blade with 4tpi / 3/16″ diameter is what I have and it has been a great tool.

These are my thoughts about other bandsaw blades that are readily available:

Highland Woodworking’s bandsaw blades are my favorite (their Wood Slicer® blades, and their General-Purpose(r) blades).

Timber Wolf is a well-known brand but more expensive that Highland woodworking.

Here are 5 of the Best Budget Band Saws

1. Grizzly G0555 Grizzly G0555 – Most Value. Latest Price. There are two schools of thought when it comes to band saws. One school of thought holds that a saw with a band is an advanced scroll saw and should only be used to do intricate, curved work. The second view sees the bandsaw as a versatile tool that can also be used in jobs that are best left for table saws.

It’s easy to see how a tablesaw can be replaced by a Grizzly G0555 with a tool this powerful. This motor, which is a full 1-horsepower unit, can easily cut through wood and other hardwoods. The constant, downward thrust of blade means that you won’t need to worry too much about kickbacks.

Overall, the G0555 by Grizzly is a very capable bandsaw that cuts boards as small as possible and can create precise curves. While it comes at a higher price than a regular budget band saw but is still incredibly useful and worth every penny considering all the saws that it can replace.

Extra powerful 1-horsepower motor

Ball-bearing blade guides for smooth operation

A table of precision ground tables for cutting with absolute accuracy

Generous 13 1/2″ cutting capacity

High precision extruded aluminium fence and miter gauge

No Table Light

Expensive

Buyer’s Manual – How To Choose The Best Band For Your Budget

Because of their unique continuous blade design, band saws lend themselves well to specific types of work. It is important to consider what type of project you intend on using your band saw for.

With that in mind, let’s look at some of the projects where you’ll commonly use a band saw, as well as the blades that are most appropriate for different types of work. Then, we’ll wrap up with a consideration of which features are most important in any band saw.

What are some common uses for band saws? Band saws have a reputation for being versatile. Here is a small sampling of everything a band saw can do:

Freehand curves are so quick and easy using a bandsaw, you might never return to a jigsaw again.

Intricate curves requiring tighter turns are often only possible with a band saw. Give your piece time to dry and then work slowly.

By marking the contours on two opposite sides of a blank, and then cutting with a freehand one side to create parallel and three-dimensional curves, you can make them both.

Rip cuts, including beveled rips, are easily accomplished with the aid of a fence or block.

Crosscuts can easily be achieved with your miter gauge.

Types of Band Saw Blades Depending on the type of project you’re looking to tackle, you may want to switch out the blade on your band saw to achieve a finer finish or cut different material. Let’s take a look at some tips to choose the right type of blade for you job.

First, the tooth shape will decide if your blade has a faster cutting speed or a smoother surface.

Looking for Features

No one cares what your band will be used for. We suggest that you search for the best.

Cutting power is determined almost entirely by how many horsepower your band saw’s motor produces. Consider the best horsepower for your budget.

It’s important to have a band saw that is easy to use. This includes changing blades. Easy-to-reach guides with quick release levers should be considered.

Durability is essential, as any band saw is likely to be a significant investment for you. Look for machines that are made from as little plastic parts possible. Also, make sure to check out warranties.

Thomas’ Top 5 Picks for The

The 7 Best Band Saws Of 2022

“>Best Band Saws

You can use the band saws to cut wood, carve metal, and carry around between jobs.

Top Band Saw With Stand:

Best Band Saw for Metal:

These highly-rated bandsaws are available for purchase. Read reviews and find out what they have to offer.

WEN’s 2017 Version 3959 is available as an upgrade. Although still a benchtop machine, the nine-inch cuttings are less than that of larger versions. However, this machine is very versatile and can help with most tasks. While it works wonderfully for a saw of its price, some reviewers suggested bolting it to a tabletop to keep it steady.

Amazon. Most Lightweight Band Saws DeWALT Bandsaw

The Milwaukee bandsaw weighs just 21 pounds and is great for anyone looking to have a lightweight portable saw. Milwaukee’s Job Site Armor Technology features it. This technology uses a combination of buffers and a coating to prevent falls from causing damage. This is Milwaukee’s 2nd version of the 6232 saw. The only difference between them is their case.

$347.95, Amazon 7. Portable Bandsaw Best for Metal WEN